Eaton EDR 3000 Installation, Operation And Maintenance Manual page 403

Direct Commands of the Breaker Wear Module
Parameter Description
Res TripCmdCr Resetting of the Counter: total number of trip commands
Res Isum trip Reset summation of the tripping currents
Res Isum Intr per Sum per hour of interrupting currents.
hour
Res Bkr OPEN Resetting of the CB OPEN capacity. 100% means, that
capacity the breaker is to be maintenanced.
Trigger signals for Sync-check
The following signals can be used to indicate synchronism
Name
-.-
DI-4P X1.DI 1
DI-4P X1.DI 2
DI-4P X1.DI 3
DI-4P X1.DI 4
DI-8P X1.DI 1
DI-8P X1.DI 2
DI-8P X1.DI 3
DI-8P X1.DI 4
DI-8P X1.DI 5
NOTICE: The "Syn-check" function is not available on EMR-XXXX devices.
Description
No assignment
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
Signal: Digital Input
EDR-3000
Setting range
Inactive,
Active
Inactive,
Active
Inactive,
Active
Inactive,
Active
www.eaton.com
IM02602003E
Default Menu path
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
391