Vc - Validate A Card; Validate A Single Card; Validate A String Of Assorted Cards - Gasboy SERIES 1000 Operation Manual

VC - VALIDATE A CARD

Use the VC command to validate specific cards in the lockout file. You may need to do this when
a card has been invalidated by the auto PIN lockout feature. You can validate a single card, a
string of up to 20 assorted cards, or a range of card numbers.

Validate a Single Card

1. At the prompt, type VC. The system displays: ENTER NO.:
*
2. Type the card number to be validated and press RETURN. If the card was previously invalid
and made valid, the system displays VALIDATED, followed by
valid, the system displays NO. IS VALID, followed by
Example:
Â
X9Â
Â
APVATÂPQÂ0Â! #$ Â
↵
Â
X7HE@7VA@Â
Â

Validate a String of Assorted Cards

1. At the prompt, type VC. The system displays: ENTER NO.:
*
2. Type the card number to be validated followed by a comma.
3. Repeat Step 2 for up to 20 card numbers.
4. When you enter your last card number or you reach 20, press RETURN. If at least one card
was previously invalid, the system displays: VALIDATED, followed by
cards were previously valid, the system responds NO. IS VALID , followed by
Example:
X9Â
Â
APVATÂPQÂ0Â!"#$"&%#"("'(
Â
X7HE@7VA@Â
Â
Â
05/29/03
Â
↵
Card Validation Commands
. If the card was previously
*
.
*
. If all of the entered
*
*
.
6-3