Section 14
FUEL ALLOCATION OPTION
DESCRIPTION
The Fuel Allocation option allows you to allocate, over a period of time, predetermined amounts of
fuel to users. This option works effectively only in a single site operation. As fuel is withdrawn
from the system, the appropriate allocation totalizer is decremented. When the totalizer reaches
zero, the user is denied fuel until you load a new allocation amount.
If you ordered this option, you indicated the field (Card, ID Field 1 or ID Field 2) to be assigned
the allocation totalizers and the number of totalizers. Then you must assign an allocation offset
(starting number) for the totalizers. For example, if you choose the vehicle number field, have 500
totalizers, and specify 1250 in the AO command, the totalizers are assigned to vehicle numbers
1250 through 1749.
You can add to, or subtract from, individual totalizers or ranges of totalizers at one time. An
allocation table, showing the allocation numbers and their current totalizer values, may be printed
on demand. A total of all totalizer values is also provided.
Allocation Commands
The Fuel Allocation commands are:
AO
load a starting point for allocations (allocation offset)
LA
load single allocation value
ML
load allocations for multiple users
AA
add to single allocation
MA
add to allocation for multiple users
SA
subtract from single allocation
MS
subtract from allocation for multiple users
CA
check single allocation
AT
configure to print all totalizers
NZ
configure to print non-zero totalizers
PA
print allocation table
MP
print range of allocation
05/29/03
14-1