Gasboy SERIES 1000 Operation Manual page 93

Fuel management system
Hide thumbs Also See for SERIES 1000:
Table of Contents

Advertisement

INV SYS ID
Invalid system identification on card used to access system; no access permitted.
(Unauthorized access may have been attempted.)
LIMIT CUTOFF
Limitation was reached, pump was turned off.
LOCKED OUT
Card invalidated; no access permitted.
NO ALLOC
Allocation option only. A user with no allocation attempted to obtain fuel. No access was
permitted.
PIN ERROR
Incorrect PIN entered; no access permitted.
PMP SW ERROR
Pump switch timer option only. The pump handle was turned on before the timeout period
was completed.
PUMP DISABLED
User selected a pump that is disabled.
PUMP IN USE
User selected a pump already in use.
PWR FAIL
The system lost power and was restarted.
READ ERROR
Card was improperly coded, damaged or improperly inserted into the card reader. (Could
also indicate card reader malfunction.)
REORDER FUEL
The tank totalizer dropped below the reorder point; fuel should be ordered. This message
replaces the original transaction message in all succeeding transactions that pump fuel from
this tank. The message disappears when the tank inventory exceeds the reorder point (i.e., a
delivery is made).
TERM ACTIVATE
A pump was activated through the terminal (using the AP command).
TIMED OUT
The pump was not accessed (or turned off) within the timeout period.
TTY CMD
Pump was inactivated from the data terminal (using the IP command).
WRG CARD ENTER
Mag card. In a two-card system, a single card was entered as the second card of a dual card
entry.
Mag or Optical with gate controller option. Card entered does not contain a card number.
05/29/03
Transaction Commands
9-15

Advertisement

Table of Contents
loading

Table of Contents