Table of Contents
Advertisement
AO - ALLOCATION OFFSET
Use the AO command to load a starting point, or offset, for the allocation table. For example, if
your system is configured for 200 allocation totalizers and the allocation offset is 1275, the
allocation table ranges from 1275 to 1474.
You cannot execute the AO command if any transactions are in progress. If you try, the system
displays this message: TRAN IN PROGRESS; the allocation offset remains unchanged.
1.
At the
prompt, type AO. The system displays: ALLOC OFFSET: XXXX
*
XXXX is the existing allocation offset.
2.
Type a new allocation offset and press RETURN.
To keep the existing allocation offset, press RETURN.
If the new allocation offset is acceptable, the
unacceptable, the system responds with question marks.
Example:
7QÂ
7HHQ9ÂQBBUAV0Â
!Â!"'%
Â
Â
05/29/03
Â
↵
Fuel Allocation Option
prompt reappears. If the allocation offset is
*
14-3
Advertisement
Table of Contents
