Table of Contents
Advertisement
GASBOY Series 1000
SI - SUBTRACT FROM TANK INVENTORY
Use the SI command to subtract inventory from a tank or tanks. You may need to do this when a
tank is accessed manually over a period of time.
1.
At the
prompt, type SI. The system displays: TANK #
*
2.
Type the tank number and press RETURN. The system displays: AMOUNT:
Amount is a 10-digit field with seven digits to the left of the decimal point and three digits to
the right.
3.
Type up to seven digits, a decimal point, then up to three more digits and press RETURN.
NOTE:
If you type seven digits, the system adds the decimal point for you. If you type
three decimal places, the system automatically returns to TANK #.
4.
The system prompts you for each tank; repeat Steps 2 and 3. To stop entering subtracted
inventory data, press RETURN at the TANK # prompt. The
Example:
Tank 1, containing unleaded regular, was accessed manually for a period of three hours. At the
end of that time, you received a report that 33.567 liters were dispensed. Enter the information as
follows:
Â
UEÂ
Â
V7PGÂÆ!
Â
↵
7IQWPV0Â##%&'Â
Â
V7PGÂÆ
Â
↵
Â
Â
7-4
prompt appears.
*
05/29/03
Advertisement
Table of Contents
