Table of Contents
Advertisement
GASBOY Series 1000
9.
If you are required to enter a Personal Identification Number (PIN), the LCD displays: ENTER
P.I.N.
Using the keypad, enter your PIN number and press ENTER. To ensure security, an asterisk
(*) appears for each digit you press. If you make a mistake while entering your PIN, press
CLEAR and enter it again.
You have three tries to enter the correct PIN. After the third unsuccessful try, the display
returns to ENTER CARD and you must start again at Step 2.
If your system uses the Auto Pin Lockout feature, the card is automatically locked out
(invalidated) after the third unsuccessful PIN entry.
10. If you are required to enter an odometer reading, the LCD displays: ENTER ODOMETER or
ENTER HOURS.
Use the keypad to enter the mileage/time that appears on your vehicle's odometer or hour
meter (up to six digits, no tenths). The digits appear as they are entered. If you make a
mistake, press CLEAR and enter the reading again. When you enter the correct reading,
press ENTER. The LCD prompts: SELECT PUMP
10. Enter the desired pump number (one digit), and press ENTER.
If the pump is available and you are authorized to use it, the LCD displays: PUMP #x IS
READY and you may proceed to dispense fuel.
If PUMP #x IS READY is not displayed, one of the following messages appears:
NO SUCH PUMP
PUMP IN USE!
PUMP DISABLED
INVALID FUEL
You have three tries to select a correct pump. If, after three attempts, the system does not
display PUMP #x IS READY, the display returns to ENTER CARD and you must begin again
at Step 2.
11. When you finish fueling your vehicle, turn off the fuel dispenser handle and return the nozzle
to its holder. The transaction information is automatically recorded in the system's memory
for later recall.
If you are using the Direct Printout feature, the transaction information is
also printed on the data terminal or logger.
Transaction information includes transaction number, card number, identification field 1,
identification field 2, date, time, pump number, product type, quantity dispensed, unit price
and/or unit and total price (if configured), odometer/hours reading, and transaction message.
13. If you have the receipt printer option and you wish to have a receipt, insert and remove your
card. The LCD displays: RECEIPT? 1=YES 0=NO.
To print a transaction receipt, press 1 and ENTER.
PRINTING. Multiple receipts print out one after the other. The system goes to idle.
2-2
The LCD displays: RECEIPT IS
05/29/03
Advertisement
Table of Contents
