Ld - Load Date And Time - Gasboy SERIES 1000 Operation Manual

LD - LOAD DATE AND TIME

Use the LD command to load the current date and time into the system.
1. At the prompt, type LD. The YEAR: prompt appears.
*
2. Type the current 2-digit year and press RETURN. The MONTH: prompt appears.
3. Type the number of the current month and press RETURN. The DAY: prompt appears.
4. Type the current day of the month and press RETURN. The HOURS: prompt appears.
5. Type the hour using 24-hour military time (00-23) and press RETURN. The MINS: prompt
appears.
6. Type the minutes (0-59) and press RETURN. The
Example:
If today's date is January 23, 1992 and the time is 9:30 PM, you would enter:
Â
H@Â
aA7T0Â)" Â
↵
IQPVD0Â! Â
↵
@7a0ÂÂ"# Â
↵
DQWT0Â"! Â
↵
IEPU0Â# Â
↵
Â
Â
NOTE: The Series 1000 uses a battery backed-up clock; date and time will be retained after a
power failure.
05/29/03
System Maintenance Commands
prompt reappears.
*
5-9