Iv - Initialize Vehicle File - Gasboy SERIES 1000 Operation Manual

IV - INITIALIZE VEHICLE FILE

Use the IV command to initialize the vehicle file. Use this command only at initial start-up or at
the beginning of a new month or L/100KM or LPH calculation period you set.
command resets the entire vehicle file; data cannot be retrieved.
executed, the ending odometer entry becomes the beginning entry and liter totals are reset to
zero.
1. At the prompt, type IV. The system displays:
*
INIT VEHICLE FILE? <Y OR N>
2. Type Y and press RETURN to initialize (reset) the vehicle file. Type N and press RETURN to
leave the vehicle file as is.
NOTE: Only Y or N are valid responses; if you type anything else, the system re-prompts
you until you enter a Y or N.
The prompt reappears.
*
Example:
Â
EXÂ
Â
EPEVÂXADE9HAÂBEHA5Â2aÂQTÂP4Âa
Â
Â
05/29/03
Â
↵
L/100KM or LPH Option
This
When this command is
19-9