Optical Card Systems - Gasboy SERIES 1000 Operation Manual

GASBOY Series 1000

Optical Card Systems

Any card with a card number in the range 9930-9979 is treated as a supervisor card. When a
supervisor card is used, ID FIELD 1 and ID FIELD 2 may be entered through the keypad. The
data entered at the keypad replaces any data that may have been on the card in those fields. If
you do not enter any data and just press ENTER, the system uses the data from the card.
When you are using an "A" System card that does not use card number and the supervisor option
is required, the field you are using for lockout is also used to identify the supervisor card. Ranges
for this type of card have the digits 30 to 79 at the end of the field. These ranges are preceded by
9's to the length of the field (for example, if the field is five digits, the range for the supervisor card
would be 99930-99979). When the supervisor card is used, data may be entered through the
keypad into any ID field other than the one used for lockout.
24-2 05/29/03