Gr - Get Receipt Command - Gasboy SERIES 1000 Operation Manual

GR - GET RECEIPT COMMAND

Use the GR command at the data terminal to print a receipt at the Series 1000 card system for a
transaction you specify. The system allows you to print a receipt for any transaction from the
transaction pointer to the present.
Receipts may be printed only for transactions which contain quantity.
previously printed for the transaction entered, DUPLICATE RECEIPT is printed on the receipt.
1. At the prompt, type GR. The system displays: TRANS NO.:
*
2. Type the number of the transaction for which you want a receipt and press RETURN. A
receipt is printed for the transaction number entered.
The prompt reappears.
*
Example:
CTÂ
VT7PUÂPQ0! Â
↵
Â
Â
If a receipt is requested for a transaction which contains zero quantity the system displays
NO QUANTITY IN TRANS!!.
Receipts are not printed if an error condition exists or the printer test is active. The system
displays CHECK THE PRINTER!! or PRINTER TEST ACTIVE!!.
05/29/03
Receipt Printer
If a receipt has been
23-3