Table of Contents
Advertisement
GASBOY Series 1000
FUEL DELIVERIES
To enter a fuel delivery at the Series 1000 card reader:
1.
At the ENTER CARD prompt, insert the fuel delivery card into the card reader. The LCD
displays: REMOVE CARD
2.
Remove the card from the reader. If you are required to enter a Personal Identification
Number (PIN), the LCD displays: ENTER P.I.N.
3.
Type your PIN digits on the keypad and press ENTER. If the PIN is correct, the LCD
displays: ENTER TANK #
4.
Type the number of the tank that received a fuel delivery and press ENTER.
You have three tries to select a valid tank. If after three attempts, you have not selected a
valid tank, the ENTER CARD message reappears and you must begin again at Step 1.
If you select a tank that is not available, this message appears: NO SUCH TANK!
If you select a valid tank, the LCD displays: ENTER QUANTITY.
5.
Type the quantity of fuel that was delivered (up to 5 digits, in whole liters only) and press
ENTER.
The quantity is added to the appropriate inventory totalizer, and the message QUANTITY
RECORDED! appears on the display.
A transaction is recorded with the tank number appearing in the P# field and the quantity
entered appearing in the QUANTITY field. The PR and ODOM fields contain zeros. The
transaction message in the ERROR field is DELIVERY for a completed transaction and
INVALID TANK for an error transaction.
Example:
UEVAÂ!"#$Â
Â
VT7PÂ97T@ÂAIRÂÂXADÂÂ@7VAÂÂÂÂÂVEIAÂÂRÆÂRTÂSW7PVEVaÂÂQ@QIÂÂÂATTQTÂ
!" )Â))(%Â!!"#Â('%$Â)" !"#Â!"0"'Â %Â ÂÂÂ#% ÂÂÂÂ
Â
15-2
Â@AHEXATaÂ
05/29/03
Advertisement
Table of Contents
