Table of Contents
Advertisement
INSTALLING M16 PORT ACCESSORIES
The port above the housing axis features a standard M16 thread hole and allows for optional
connectors and accessories to be installed on the housing, including HDMI, vacuum valve or
electronic strobe triggering bulkheads. For such accessories offered by Fantasea, please visit the
Fantasea website –
1. To remove the M16 port cover insert a coin into the dedicated slot featured on the cover and
turn the cover counterclockwise until it can be safely removed (images #30 and 31).
Image #30
2. Store the cover for possible future use.
3. Follow the instructions provided with the selected accessory product in order to install it
inside the housing and make sure the M16 port accessory installed consists of an O-ring for
maintaining the watertight seal of the housing.
Important
Note
www.fantasea.com
Once an accessory has been installed using the M16 port, it important to
carry out the first dive with the housing empty (no camera installed
inside) in order to verify that the housing watertight seal has not been
affected during the replacement
Image #31
FA6500 Housing Instruction Manual 20170315
25
Advertisement
Table of Contents
