Lens Accessories; Cold-Shoe Connector For Lighting Accessories; M16 Port Accessories; Moisture Detector - Fantasea Line FA6500 Instruction Manual

For sony a6300 and a6500

Table of Contents

LENS ACCESSORIES

Some lens ports compatible with the FA6500 Housing can be used in combination with a variety of "wet"

conversion lenses and color correction filters. These lenses and filters are mounted over the housing lens

port and can be installed and removed during the dive, providing flexibility in composition preferences and

a wide range of enhancement options according to changing diving conditions. Such lens accessories

include:

• Optical Wide Angle Wet Lenses: Wide angle lenses allowing for high quality wide angle images.

Perfect for shooting seascape, divers, ship wrecks and schools of fish, without moving further away

from the subject, thereby still taking full advantage of water clarity and artificial light sources.

• SharpEye Macro Lenses: Perfect for shooting close-up images of fish, corals, textures and more.

These macro lenses magnify the subject and enable the camera to focus on short distances for

creating super sharp images.

• RedEye & PinkEye Color Correction Filters: Used to restore the colors absorbed by the water. In

shallow depths, these filters can serve as an attractive alternative to artificial light sources.

EyeGrabber Lens Holders: Attach to Flex or Ball & Joint arms, enabling safe, secure and easily

•

accessible storage for your lens accessories when not in use during the dive.

The Cold-Shoe Mount featured on the housing enables mounting a flash, video light, night dive torch or

focus light on top of the housing by using a standard Cold-Shoe connector mount.

The housing is equipped with a standard M16 port which allows for optional connectors and accessories to

be installed on the housing, including HDMI, vacuum valve or electronic strobe triggering bulkheads. For

such accessories offered by Fantasea, please visit the Fantasea website – www.fantasea.com.

The FA6500 Housing comes with a Moisture Detector installed inside (on the inner side of the housing latch

dial – see page 13). Moisture detectors are very sensitive, so whenever moisture is detected by the sensor

located at the bottom of the housing, the moisture detector LED light begins flashing and a warning alarm

starts beeping, thereby alerting the user of a possible leak. For further instructions, please refer to the

Fantasea Moisture Detector section.

FA6500 Housing Instruction Manual 20170315

Table of Contents