Installing M16 Port Accessories - Fantasea Line FA6000 Instruction Manual

h. Install the camera inside the housing (see
section "Install the Camera") and test the
housing shutter release control to ensure
it properly activates the camera shutter
release button.
i. Note that if encountering problems with
operation of the control upon completing
the replacement, the spring featured on
the interior of the control might have
accidently moved out of place. This being
the case, remove the shutter release
trigger again, gently push the metal shaft
of the control towards the housing,
rearrange the spring inside the housing so
it sits entirely below the black plastic lever
of the control (image #10), push the
control metal shaft back out and reinstall
the trigger.

INSTALLING M16 PORT ACCESSORIES

The port above the housing axis features a standard M16 thread hole and allows for optional
connectors and accessories to be installed on the housing, including HDMI, vacuum valve or
electronic strobe triggering bulkheads. For such accessories offered by Fantasea, please visit the
Fantasea website –
1. To remove the M16 port cover insert a coin into the dedicated slot featured on the cover and
turn the cover counterclockwise until it can be safely removed (images #11 and 12).
Image #11
www.fantasea.com
Image #9
Image #10
Image #12
FA6000 Housing Instruction Manual 20190204
19