Operator Responsibility - Safety Recommendations - Julabo F25-MC Operating Manual

Operator responsibility – Safety recommendations
2. Operator responsibility – Safety recommendations
The products of JULABO ensure safe operation when installed, operated, and
maintained according to common safety regulations. This section explains the potential
dangers that may arise when operating the circulator and also specifies the most
important safety precautions to preclude these dangers as far as possible.
The operator is responsible for the qualification of the personnel operating the
units.
The personnel operating the units should be regularly instructed about the dangers
involved with their job activities as well as measures to avert these dangers.
Make sure all persons tasked with operating, installing, and maintaining the unit
have read and understand the safety information and operating instructions.
When using hazardous materials or materials that could become hazardous, the
circulator may be operated only by persons who are absolutely familiar with these
materials and the circulator. These persons must be fully aware of possible risks.
If you have any questions concerning the operation of your unit or the information in
this manual, please contact us!
JULABO Labortechnik GmbH
Contact
Eisenbahnstraße 45
77960 Seelbach / Germany
Safety instructions for the operator:
Nevertheless, avoid strikes to the housing, vibrations, damage to the operating-
element panel (keypad, display), and contamination.
Make sure the product is checked for proper condition regularly (depending on the
conditions of use). Regularly check (at least every 2 years) the proper condition of
the mandatory, warning, prohibition and safety labels.
Make sure that the mains power supply has low impedance to avoid any negative
effects on instruments being operated on the same mains.
This unit is designed for operation in a controlled electromagnetic environment.
This means that transmitting devices (e.g., cellular phones) should not be used in
the immediate vicinity.
Magnetic radiation may affect other devices with components sensitive to magnetic
fields
(e.g., monitors). We recommend maintaining a minimum distance of 1 m.
Permissible ambient temperature: max. 40 °C, min. 5 °C.
Permissible relative humidity: 50% (40 °C).
Do not store the unit in an aggressive atmosphere.
Protect the unit from contamination.
Do not expose the unit to sunlight.
6
07823 / 51-0
07823 / 2491
info@julabo.de
www.julabo.de