7.
Setting the temperatures
7.1.
1-setpoint mode
Example: Actual value
Setpoint
Actual value
7.2.
3-setpoint mode
Factory settings:
25 °C
37 °C
70 °C
The function of the
1. If the key is pressed, normally only one adjustable
working temperature is displayed (factory setting).
2. Press the
assign a menu with 3 pre-adjustable setpoints to the
key. (see page 43)
1.
Press the
actual value is indicated on the display. The value can
now be changed.
2.
Change the value: (Example: 30.0 °C to 65.0 °C)
• Use the cursor keys
display until the numeral you wish to change blinks.
• Use the increase/decrease arrows
the selected numeral (-, 0, 1, 2, 3, ... 9).
3.
Press enter
Setting can be carried out in the start/stop condition.
Press the
key to call up the menu for temperature
selection.
3 different working temperatures are adjustable. Their values
are freely selectable within the operating temperature range.
Setting can be carried out in the start/stop condition.
key is configurable.
button to call up the menu
key. The setpoint value instead of the
to move left or right on the
to store the value.
MC
, then
to change
31