Change-Over Of The Key Mode; Remote Control: Activate - Deactivate - Julabo F25-MC Operating Manual

9.3. Change-over of the
Factory setting: no
9.4. Remote control: activate – deactivate
Factory setting: no
key mode
Normally, the
adjustable working temperature.
Press the key, to call up a menu with 3 pre-adjustable
setpoints.
1.
Press the
displayed.
2.
Press enter
3.
Select the parameter with the keys
4.
Press enter
>no< Key
>YES< Key
Continue: Press
The circulator is to be prepared for remote control by a
personal computer via the serial interface RS232: Set the
menu item >remote< from >no< to >YES<.
1.
Press the
displayed.
2.
Press enter
3.
Select the parameter with the keys
4.
Press enter
>no< No remote control via RS232
>YES<
Continue: Press
The display changes from
keypad control mode (manual operation) to
remote control mode (operation via personal computer).
key is used to indicate only one
button until the menu item
to indicate the parameter.
to store the selected parameter.
in 1-setpoint mode
in 3-setpoint mode
to quit the menu.
button until the menu item
to indicate the parameter.
to store the selected parameter.
to quit the menu.
MC
is
(YES/no).
is
(YES/no).
43