1.3
Safety Messages
1.3.1
Safety Messages - United States
Symbol
Danger:
ESD:
Caution:
PLT-01277, Version: 1.2
Introduction and Specifications
Critical Instructions for Safety Purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures, unless otherwise
specified.
• Ensure only qualified personnel perform these procedures.
This device is electro statically sensitive. The device may be damaged if exposed to static
electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while handling cables
in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making any repairs,
unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the Printer.
This symbol warns of an electrical hazard that could result in personal injury or death.
Page 1-4
November 2014