Isdn Outgoing Trunk Access - NEC XN120 Getting Started Manual

Making Changes to the Configuration

ISDN Outgoing Trunk Access

Description
Assign which trunk is selected when user dials 9, use speed dial or auto trunk seize
Assign access to other groups, if all lines busy in own group.
Assign route for each extension
This can be used for dedicated lines such as faxes, private line or to separate analogue and
ISDN lines
Dial 9
'
To Route
21-02
'
Per Extn
-
Per Mode
Pre config - initial data
All extension access - Route 1 (only)
Route 1 access trunk group 1 (only)
Trunks 1 to 3 = Trunk group 25
Trunks 4 to 7 = Trunk group 1
Trunks selected from Line 7 down
Options
Remove trunks, which are not used by setting as trunk group 0.
(IMPORTANT – If not removed-users can select trunk ports-which are not connected)
Select which order trunks are selected - change to reverse order.
Assign access to extensions and other trunk groups, dedicated lines or to separate analogue
and ISDN trunks
58
Route to
Priority
Trunk Grp
14-06
14-06
Trunk
Item
group to
1-4
Route
Alog pre
config
ISDN pre
config
Group to
Priority
Trunk
14-05-
14-05-
Item 1
Item 2
Group
No.
✔