NEC XN120 Getting Started Manual page 15

PCPro via Serial
9. In the Completing the New Connection
Wizard click Finish
10. You will then be shown the
connection screen. If you want to
establish the connection then click
Connect (enter the User Name and
Password) otherwise click Cancel.
Installer level Password – CASE
SENSITIVE
User Name – TOPAZ
Password – 12345678
To connect via the Serial dial up
session at any time select the session
(eg XN120 via Serial) from the list
within the Network Connections
screen. You will see this screen.
11. When you select Connect you will
see the connection screen for a brief
time and then it will close.
12. You have now established comunication between your PC and the XN120 via the serial
cross cable.
15