NEC XN120 Getting Started Manual page 50

Making Changes to the Configuration
Item No
Name
01
Option name for the group
02 Calling Cycle
Priority or UCD hunting
03 Routing when Busy
Internal calls to a busy member of a
group can receive busy tone or step to
the next member.
04 Hunting Mode
Hunt once around the group or hunt
continuously
Extension Group All Ring mode
05
Operation
Calls to the group ring all members
either manually by the user dialing a
service code or automatically when the
call arrives.
06 Extension Group withdraw mode
Do not change this option, leave at 0.
07 Call Recall Restriction For STG
Do not change this option, leave at 0.
Maximum Queuing Number of
08
extension group call
You can limit the quantity of trunk calls
that will queue at a busy group
09 Extension Group Call No Answer
Time
Set how long each member will ring
before the call steps to the next
available member.
10 Enhanced Hunting Type
Do not change this option, leave at 0.
50
Item Data
Up to 12 Characters
0: Priority Routing
1: Circular Routing (UCD)
0: Hears Busy tone
1: Routes to idle member
0: stop at last member
1: Circular (hunt
continuously)
0: Manual
1:Automatic
0: Disable (Camp on)
1:Enable (Overflow)
0: Disable (Recall)
1:Enable (Non Recall)
0-32
0-64800
0:No Hunting
1:Busy
2:No answer
3 Busy/No answer
Default
0
0
1
0
0
0
0
15
0