Trunk Outgoing Call; Specified Trunk Access; Single Step Access; Preselection - NEC AK-308 User Manual

Trunk Outgoing Call

Specified Trunk Access

Trunk lines can be grouped into a maximum of 30 groups. The line groups assigned to each extension are
used for out-going calls. Up to two outgoing line groups can be assigned to an extension by system
programming. You can place outside calls on a particular line group by pressing Line key or dialing line
number.
To make an outside call on a
particular line using Line key:
To make an outside call by
dialing line number:

Single Step Access

Single Step Access allows you to obtain outside or intercom dial tone for an outgoing call in a single step,
without lifting the handset or pressing the SPK key.
To obtain outside dial tone
using Single Step Access:
To obtain intercom dial tone
using Single Step Access:

Preselection

This feature permits access to a Trunk line or Intercom by lifting the handset or pressing the SPK key within
three seconds of pressing a Line or ICM key when Single Step Access is disabled.
To obtain outside dial
tone/Intercom dial tone using
4
1. Lift handset or press
2. Press a
1. Lift handset or press
2. Dial
3. Dial two-digit line number. Hear dial tone.
4. Dial telephone number.
1. Dial 0 (or 9).
2. Dial two-digit line number. Hear dial tone.
3. Dial telephone number.
- Do not lift handset.
1. Press a
- Dial tone comes over the speaker.
- Do not lift handset.
1. Press
- Dial tone comes over the speaker.
1. Press a
2. Lift handset or press
- Trunk Line or Intercom is seized.
Preselection:
SPK
key.
LINE
key. Hear dial tone.
SPK
key.
0 .
9
LINE
key. The Line key and SPK key light.
ICM
key. ICM and SPK key light.
ICM
LINE
or key.
SPK
key within 3 sec.