NEC XN120 Getting Started Manual page 16

PCPro Via Serial
You now need to connect to the XN120 with PCPro.
13. Go to the XN120 PCPro screen and select
Click Communication Tab, click Connect (or press F5).
14. In the Connection window, which appears, enter the XN120 user name, password, and IP
address 192.78.0.1 (this is a a fixed IP address used by PCPro to identify the serial dial up
session).
Installer level Password – CASE SENSITIVE
User Name – TOPAZ
Password – 12345678
15. Click CONNECT.
Communication is established between PCPro and XN120 system via the Serial connection
and the Main Screen will appear. The Connect icon greys out and the Upload, Download &
Disconnect icons become available)
16
If there is no connection available to the
XN120 you will see an error message
indicating that PCPro is unable to connect to
the KSU. Check your cables and settings.