Analogue Outgoing Trunk Access - NEC XN120 Getting Started Manual

Analogue Outgoing Trunk Access

Description
Assign which trunk is selected when user dials 9, use speed dial or auto trunk seize
Assign access to other groups, if all lines busy in own group.
Assign trunk group for each extension.
This can be used for dedicated lines such as faxes or private line
Dial 9
'
To Route
21-02
'
Per Extn
-
Per Mode
Pre config - initial data
All extension access - Route 1 (only)
Route 1 Access Trunk group 1
All trunks in trunk group 1
Trunks selected from Line 1 -up
Options
Remove trunks, which are not used by setting as trunk group 0.
(IMPORTANT – If not removed-users can select trunk ports-which are not connected)
Select which order trunks are selected - change to reverse order.
Assign access to extensions and other trunk groups or for dedicated lines
Making Changes to the Configuration
Route to
Priority
Trunk Grp
14-06
14-06
Trunk
Item
group to
1-4
Route
Alog pre
config
ISDN pre
config
Group to
Priority
Trunk
14-05-
14-05-
Item 1
Item 2
Group
No.
✔
55