Use Pcpro To Configure Inmail; Pcpro Initial Setup Wizard; Mailbox Overview - NEC SL2100 Quick Install Manual

Use PCPro to configure InMail

3 – Use PCPro to Configure InMail

PCPro Initial Setup Wizard

If you have used the Initial Setup Wizard to configure the SL2100, then the mailboxes are automatically adjusted
to suit your chosen extension range.
You can check the InMail configuration within PCPro.
In EasyEdit >Quick Install >Voicemail you have access to all the InMail configuration settings.

Mailbox Overview

In EasyEdit >Quick Install >Voicemail >VM Basic Setup you can modify the subscriber configuration of the
InMail. A subscriber mailbox is directly associated with a telephone extension.
The common items are summarised in the table below
Mailbox Type
Mailbox Extension
Message Count
Automated
Attendant Directed
to Voice Mail
Automatic Time
Stamp
System
Administrator
Dialing Option
Next CRMB
Voice Prompt
Language
Security Code
Option
Quick Install Guide – SL2100 InMail Voicemail rev 1.2
Set to Personal to enable, or None to deactivate a mailbox
Define the telephone number to be associated with
The maximum number of new or saved messages that can be stored in this mailbox
(max 99)
Not often used, this feature will enable a permanent forward to voice mail on the
selected telephone extension
Used for analogue (SLT) telephones, the time/date of the message is audibly
announced. This information is visible on screen for SL2100 telephones
System administrators can reset passcodes for other mailboxes, and also record
system wide greetings
See below for full description
See Dialing Option below for full description
Prompt language for mailbox user. SL2100 supports one language unless the SDVMS
or SDVML card is installed
Should the user be required to enter their security code if accessing the voice mail box
from an internal system phone (as opposed to externally via a trunk line)
7