Pitney Bowes K700 Operator's Manual page 29

3 ● Running Mail
Entering Weight Manually with Optional Internal Rating
Use this method when:
• you already know the weight of a mail piece and you are not using
the optional scale.
• you are using the optional scale and the weight of the mail piece
exceeds that weight limit of the scale (2 or 5 lbs., depending on
model).
Menu
1. Press
2. Use the Review keys to scroll to "Type in a Weight?" and press
Enter/yes.
3. Key in pounds and press
4. Key in ounces and press
NOTE 1: If there was no class specified on the display when you
placed the mail piece, you may need to scroll and select the desired
class (if you are unsure if a particular class is best for your mail piece,
call your local post office or visit www.USPS.com). Otherwise, the
mailstation™
piece.
NOTE 2: The mailstation™ meter allows you to enter either a ZIP
Code or a Zone number for those USPS classes that require a
destination entry (e.g., Priority class over 1 lb.). When prompted
to enter a ZIP or Zone in these cases, you may either key in the
5-digit ZIP Code or one-digit Zone number (0-8). In any case,
the ZIP/Zone entered should represent the ZIP/Zone of the mail
piece destination,
5. The display shows the final postage amount and class chosen.
6. Slide the envelope (or tape sheet if mail piece is too big for machine)
into the mail deck. The
and indicates when to remove the mail piece.
3-4
.
Enter/yes
Enter/yes.
meter selects a class based on the weight of the mail
not the machine.
mailstation™
mailstation Digital Postal Meter | SV61374 Rev. J
™
.
meter prints the digital indicia