Stapler Head - Oki B930 Service Manual

Roll Assy Transfer
(Driven by Regi Motor)
From H-TRA
Roll Assy Ent
(Driven by Finisher
Transport Motor)
Buffer Roll
(Driven by Regi Motor)
Butter Gate
Main Paddle
(Driven byFinisher Transport Motor)
Upper limit of Compile Tray paper capacity when stapling: default: 50 (variable (10 to 100) by the
non-volatile memory),
0.4 Stapler Operation
The Stapler stays at the front home position, that is, at the Front Staple (Corner) position when
the power is turned ON.
The Stapler starts stapling when a set of sheets to be stapled is stacked on the Compile Tray.
The Stapler does not move during stapling in the Front Staple mode.
In any mode other than the Front Staple mode, the Stapler moves to the specified position, and
then perform stapling
Staple Move Motor(204)
Staple Move Position SNR

Stapler Head

Roll Assy-Exit Top
(Driven by Exit Motor)
Transter Gate
Sub Paddle
(Driven by Finisher Transport Motor)
Eject Clamp
(Driven by Eject Clamp Motor)
Shaft Assy-Eject Roll
(Driven by Eject Motor)
Roll Assy-Exit Low
(Driven by Exit Motor)
Paper handling
direction
2-75
FI6P028A2
FI6P017A1