Wiring Diagram Between Parts; Configuration; Notes On Using The Wiring Diagram Between Parts - Oki B930 Service Manual

PWB A
MCU F
PL8.1.5
P/J417

Wiring Diagram between Parts

Configuration

The wiring diagram is separated into 1 sections to show detailed connection between parts.
• 1 Duplex
- Connection between PWBA DUPLEX and SENSOR-PHOTO IN (Duplex Sensor)
- Connection between PWBA DUPLEX and SWITCH-I/L,CAB (Duplex Open Switch)
- Connection between PWBA DUPLEX and MOTOR ASSY DUP
- Connection between PWBA DUPLEX and PWB A MCU F

Notes on Using the Wiring Diagram between Parts

The following describes the legend of the wiring diagrams between parts shown on the following
pages.
Note that the description of general symbols is omitted.
Symbols
P/J
XX
YY
PWBA ABC
PL X.Y.Z
PWB
DUPLEX
PL23.1.12
P/J540 P/J541
P/J542
Denotes a plug.
Denotes a jack.
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Chapter 5.
Parts List.
4-32
SENSOR-PHOTO IN
P/J123
(Duplexl Sensor)
PL23.1.18
SWITCH-I/L,CAB
P/J124
PL23.1.9
MOTOR ASSY DUP
P/J212
PL23.1.11
FI72301AA
Description