Power Supply And Interlock - Oki B930 Service Manual

A DC motor to elevate or lower the Eject Clamp when feeding paper from the Puncher to the
Compile Tray or from the Compile Tray to the Stacker Tray
9. Set Clamp Home Sensor
A photo-interrupter to detect the Set Clamp home position. This sensor functions as a trigger
to control ON/OFF of the Set Clamp Clutch.
10. Set Clamp Clutch
When this clutch is activated, it transmits the Eject Motor rotating power to the Shaft Assy-
Eject Roll.
Stacker Height Sensor
Stacker Height Sensor
Upper Limit Sensor
Stacker No Paper Sensor

Power Supply and Interlock

The Finisher is equipped with the following interlock switches.
• Finisher Front Door Switch:
Turns OFF when the Cover Assy Front opens, shutting off the Interlock, +24 VDC line in the
Finisher.
• Eject Cover Switch:
Turns OFF when the COVER EJECT on the right side opens, shutting off the Interlock, +24
VDC line in the Finisher.
Set Clamp Clutch
2-81
Eject Clamp Motor
Eject Clamp
Home Sensor
Set Clamp
Home Sensor
Stack Encode
Elevator Motor
Sensor
Eject Motor
FI6P038A1