Oki B930 Service Manual page 56

the GEAR ASSEMBLY (Tray 3). The BOTTOM PLATE is pushed up via the TRAY CABLE,
F/R CABLE and F/L CABLE by the rotation of the LIFT SHAFT ASSEMBLY, which causes
the supplied paper to get in contact with the ROLLER ASSY (NUDGER).
Regarding the Tray4, the force pushing up the BOTTOM PLATE is transmitted to the LIFT
SHAFT ASSEMBLY through the GEAR ASSEMBLY (Tray 4). The BOTTOM PLATE is
pushed up via the FRONT TRAY CABLE and REAR TRAY CABLE by the rotation of the
LIFT SHAFT ASSEMBLY, which causes the supplied paper to get in contact with the
ROLLER ASSY (NUDGER).
• Tray3 Paper Cassette
TRAY CABLE
REAR SIDE GUIDE
FRONT SIDE GUIDE
BOTTOM PLATE
F/R CABLE
F/L CABLE
2-47