Tray3 - Oki B930 Service Manual

Signal line name
TAKEAWAY CLUTCH ON(L)+24VDC
TAKEAWAY MOTOR ON(L)+5VDC
TAKEAWAY MOTOR CLOCK
M/C CLOCK
LEFT COVER OPEN(H)+5VDC
ENGINE TO 2TM
2TM TO ENGINE
TRAY3 FEED/LIFT MOTOR ON(H)+5VDC
TRAY4 FEED/LIFT MOTOR ON(H)+5VDC
FEED READY
TRAY3 FEED OUT PAPER SENSED(L)+5VDC
TRAY4 FEED OUT PAPER SENSED(L)+5VDC
FEED STOP

2 Tray3

Description
TAKEAWAY CLUTCH ON/OFF control signal
TAKEAWAY MOTOR ON/OFF control signal
Clock signal to TAKEAWAY MOTOR
Clock signal from TAKEAWAY MOTOR
LEFT COVER open/close detection signal by LEFT
COVER INTERLOCK SWITCH
Communication signal of PWB A MCU F (Engine)
and TRAY MODULE PWB (2TM) (Engine->2TM)
Communication signal of TRAY MODULE PWB
(2TM) and PWB A MCU F (Engine) (2TM->Engine)
TRAY3 FEED LIFT UP MOTOR ON/OFF control
signal (Engine->2TM)
TRAY4 FEED LIFT UP MOTOR ON/OFF control
signal (Engine->2TM)
Feed ready signal from 2TM (2TM->Engine)
Paper detection signal by TRAY3 FEED OUT SEN-
SOR in transport section (2TM->Engine)
Paper detection signal by TRAY4 FEED OUT SEN-
SOR in transport section (2TM->Engine)
Feed stop signal to 2TM (Engine->2TM)
4-26