Finisher; Overview; Configuration - Oki B930 Service Manual

The MOTOR ASSY DUP transmits driving force to the ROLLER DUP A3L (UPPER), ROLL
ASSY DUP and ROLLER DUP A3L (LOWER) that feed paper.
MOTOR ASSY DUP

Finisher

Overview

The Finisher performs post-processing, such as stapling, punching, and stacking paper trans-
ferred from the IOT, and ejects paper to the Top Tray or the Stacker Tray.
The following outlines the operation of the Finisher.

Configuration

The Finisher is composed of the following five blocks:
• Horizontal-Transport Block to feed paper from the IOT to the Finisher (called "H-TRA" hereaf-
ter)
• Puncher Block to punch paper
• Compile Tray Block to align paper
• Stapler Block to staple a set of paper at specified positions
• Stacker Tray Block to stack paper
ROLLER DUP A3L (UPPER)
SENSOR-PHOTO IN
ROLLER DUP A3L (LOWER)
2-54
PWBA DUPLEX