Motor - Oki B930 Service Manual

Signal line name
UPPER LIMIT SENSED(L)+5VDC
STACKER PAPER SENSED(L)+5VDC
STACKER ENCODE SENSOR SENSED(L)+5VDC
SET CLAMP HOME SENSED(L)+5VDC
EJECT CLAMP UP(L)+5VDC
STACKER HEIGHT SENSOR1 CLOCK
STACKER HEIGHT SENSOR2 CLOCK
STACKER HEIGHT SENSOR1 SENSED(L)+5VDC
STACKER HEIGHT SENSOR2 SENSED(L)+5VDC

5 Motor

Maximum detection signal at the time of Stack
Tray rise by SENSOR (Upper Limit Sensor)
Paper detection signal in Stack Tray by SEN-
SOR (Stacker No Paper Sensor)
Encoder pulse count detection signal by SEN-
SOR (Stacker Encode Sensor)
(The quantity of the paper discharged by the
pulse count on Stack Tray is detected)
Set Clamp home position detection signal by
SENSOR (Set Clamp Home Sensor)
Eject Clamp up/down detection signal by SEN-
SOR (Eject Clamp Sensor)
Abnormal conditions signal for driving the infra-
red rays Light Emitting Diode of STACKER
HEIGHT SENSOR1
Abnormal conditions signal for driving the infra-
red rays Light Emitting Diode of STACKER
HEIGHT SENSOR2
Height detection signal of Stack Tray by COVER
ASSY SENSOR (Stacker Height Sensor1)
Height detection signal of Stack Tray by COVER
ASSY SENSOR (Stacker Height Sensor2)
4-51
Description