Adtec RD-71 User Manual page 83

The RD has capability to create profiles from the current running RF configuration and load
it at a later time.
To create a profile:
Enter the desired RF parameters required for the profile
●
Click the Apply button to save information to the currently running configuration
●
Click the 'Create RF Profile' button next to the respective tuner that is desired to be
●
stored.
Name the RF Profile and click OK. Please note that only Alphanumeric and
●
underscores are allowed in the profile name. If Spaces " ", Dashes "-", or other
special characters are entered, an error window will pop up.
All drop downs will populate with the created RF profile name
●
To load a profile:
Select an RF profile from the 'Select Profile' list above the desired tuner.
●
After selection, the profile will be "previewed" and all configuration fields will display
●
the contents of the profile.
If the profile is desired to be loaded into the respective tuner, click the Apply button.
●
If the profile is not desired, the Cancel button may be clicked or the double dash
profile "--" may be selected to exit from preview mode. Exiting preview mode will
return to display the current running configuration.
Profile Management:
The Manage RF Profiles box gives users the ability to Delete (Red X button) or
●
Download (Downward Yellow button) RF Profiles from the IRD.
Select a Profile and click the Delete button to have the profile removed from the
●
device and all drop down boxes.
Select a Profile and click the Download button to have the profile downloaded to your
●
PC.
The standard Upload button next to the Logs and Thumbnail button may be used to
●
Upload a profile to other devices.
83