Adtec RD-71 User Manual page 61

is down-scaled dependent upon the source format. If the source format is 50Hz, the output
will be down-scaled to PAL (720x576@50Hz). If the source format is 59.94 Hz, the output
will be down-scaled to NTSC (720x480@59.94Hz). Please note that there will be a 1 frame
delay in the down-scaled output. Audio synchronization is accounted for automatically on
scaled outputs.
Fault Mode​ - Display or Modify the current SDI video fault setting. This setting sets the
video resolution when in video fault. This setting will be applied on startup when no video is
present. If video becomes present, the setting will be overridden by the current video
setting. 1080P extended options are available when ​ B IF​ shows BIXX (BI02, BI10). No
feature key is required for this setting
Fault On Video Loss​ - In video fault, this will define the display.
STOP DECODING
BLACK
BARS
BARS & TONES
BARS, TONES &
SRV ID
HOLD LAST FRAME:
STOP DECODING
HOLD LAST FRAME:
BLACK
HOLD LAST
FRAME:BARS
HOLD LAST
FRAME:BARS &
TONES
HOLD LAST
FRAME:BARS & SRV
ID
HOLD LAST
FRAME:BAR, TONES
and SRV ID
If the "--" option is displayed when loading this tab, one of the current configuration
settings is not supported. We suggest selecting a different option to properly configure your
device.
Sets RVD to ​ S TOP.
Sets RVD to ​ B LANK, and the color bar generator to ​ B LACK.
Sets RVD to ​ B LANK, and the color bar generator to ​ B ARS.
Sets RVD to ​ B LANKTONES, and the color bar generator to ​ B ARS.
Sets RVD to ​ B LANKTONESOVERLAY, and the color bar generator
to ​ B ARS.
Video output will stop at boot time and will hold last frame of
video and output no audio on signal loss.
Video output will be black with no audio at boot time and will
hold last frame of video and output no audio on signal loss.
Video output will be color bars with no audio at boot time and
will hold last frame of video and output no audio on signal loss.
Video output will be color bars with audio tones at boot time and
will hold last frame of video and output no audio on signal loss.
Video output will be bars with audio and device name overlay at
boot time and will hold last frame of video and output no audio
on signal loss.
Video output will be bars with audio and device name overlay at
boot time and will hold last frame of video and output no audio
on signal loss.
61