Table of Contents
Advertisement
Standard: Asynchronous Serial Interface per EN500083-9
ASI Mirrored from DVB-ASI Input, IP Input, or RF Input with purchase of optional tuner package. All
streams are output as 188 byte packets.
Connector: 3x BNC (75 Ohm)
AES Audio
Standard: AES3
8 pairs of decoded audio
Connector: 8x BNC (75 Ohm)
Analog Audio
Two balanced pairs via DB9 connector. (1 pair per DB9)
+18dBu nominal clipping level, -40 to +18dBu selectable.
Connector: 2x DB9 (600 Ohm)
IP Output
Use: Output available for unicast/multicast transmit. TS input/output can share the same connector
as required.
Standard: UDP, RTP and SMPTE 2022 COP3 FEC
Supports 1 to 7 TS packets per IP packet
Connection speed: GigE (10/100/1000 Auto-Negotiate)
Transmit capability: x4 simultaneous MPEG over IP transport streams
Connector: 2x RJ45
Communications
COM2 Serial Port
Use: API Serial Communication Interface
Default Baud Configuration: 38,400bps 8 data bits 1 stop bit no parity
Connector: 8 pin RJ45
COM1 Serial Port
Use: Serial Port Used for Troubleshooting (Terminal)
Connector: 8 pin RJ45 (supplied with DB9 to RJ45 adapter)
Baud Configuration: 115,200 bps 8 data bits 1 stop bit no parity
IP 1 and IP 2 GigE Ports
Use: IP 1 port is used for network management by default, but can also be used for IP receive. IP 2
port can also be used for management. Security controls allow disabling IP 2 management as needed.
Format: GigE 10/100/1000BaseT
Communication Methods: WebUI, SNMP, Telnet, XCP
Connector: 2x RJ45
DB9 Parallel Port
Use: DB9 parallel port used for custom triggering / integration
Connector: DB9 Male
GPIO Port
Use: not used as this time
Connector: DB9 Male
111
Hide quick links:
Advertisement
Table of Contents
