Table of Contents
Advertisement
Mode - Configures whether Genlock should be in FREE RUN mode (OFF) or if it should lock
to the incoming source (REMOTE). The Slave configuration disables audio SRCs and is to be
used for special genlock applications.
CVBS - Sets the Composite/CVBS output. When set to
V IDEO CVBS output is video, when
set to SYNC , CVBS output is black burst sync signal. SYNC is recommended if used as a
master unit in special genlock applications (3D, UltraHD, Synchronous playback).
Horizontal Adjust -
H orizontal adjustment defines the difference in the SYNC IN HSYNC
and output HSYNC. Typically, this should be in the range of 0 to +1 line in clocks. For
example, a 1080I output could be adjusted from 0 to 2200. Negative values can be entered.
Vertical Adjust -
V ertical adjustment defines the difference in the SYNC IN VSYNC and
output VSYNC. Typically, this should be in the range of 0 to +1 frame in lines. For example,
a 1080I output could be adjusted from 0 to 1125. Negative values can be entered.
Pixel Phase -
P ixel Phase adjustment is a very fine grain adjustment that can adjust within
a single clock. The increments are 1/64th of a clock. The valid range is 0 to 63.
59
Hide quick links:
Advertisement
Table of Contents
