Adtec RD-71 User Manual page 62

OSD Mode​ - Controls the mode of the entire OSD engine (ON/OFF).
OSD Output​ - Select where the OSD output will be displayed. Options are SDI, SDIALT,
both, and none. The Digital Video and CVBS video outputs mirror SDI output (with the
exception of Genlock -> CVBS Control, CVBS can be set to black).
OSD Service Mode​ - Enables/Disables the OSD Service.
OSD Service Lines​ - Defines what is displayed on the OSD services command.
The format of the display is below:
(1) Service Name
(2) Service Provider
(3) Input
(4) TMR
For example a value of 3 will display lines 1-3. A value of 2 will display lines 1-2. These lines
can not be selected individually.
OSD Service Blink​ - Blink is used as a bit defined field. When used with the string
command it will blink the entire string not individual lines or characters. For example, binary
number 1010 will blink the 2nd and 4th line of the services command.
Web UI - Audio
Audio​ allows users to manually configure audio PIDs, adjust PID order, lipsync, dolby and
audio sync settings. A user will be able to configure and control 8 audio PIDs if the
AUD-EXT key is enabled.
62