Adtec RD-71 User Manual page 33

CAS Menu
Item
Mode
Clear Session Word
Encrypted Session
Word
User ID One
User ID Two
TS Out Decrypt
IP Tx Menu
Note: this is a parallel menu. It has four indices. Use the left or right arrows to navigate to
desired index.
Function
Configures the current decryption setting.
The session keys used for decryption.
[MODE BISS_1] uses a 12-digit
hexadecimal Clear Session Word.
The 16-digit hexadecimal Encrypted
Session Word for use with BISS_E
modes.
Valid in Mode BISS_E_USER_ID_ONE
ONLY. The 14-digit hexadecimal User ID
(injected ID) used for decryption.
Valid in Mode BISS_E_USER_ID_ONE
ONLY. The 14-digit hexadecimal User ID
(injected ID) used for decryption.
The TS Out Decrypt configuration
determines if the ASI output should
mirror the selected input (OFF), thus
preserving any encrypted streams or if it
should be decrypted / free to air (ON).
OFF, the default configuration, is
recommended for users needing to
redistribute transport streams in their
original form. The decoder will decrypt /
decode the selected program with the
entered BISS key, but the ASI output will
remain unaltered.
ON is recommended for users needing to
redistribute the ASI output as a free to
air SPTS/MPTS. All programs will be
decrypted with the user entered BISS
key.
33
Options
OFF
BISS_1
BISS_E_USER_ID_ONE
BISS_E_USER_ID_TW
O
user-defined using the
numeric keypad
user-defined using the
numeric keypad
user-defined using the
numeric keypad
user-defined using the
numeric keypad
OFF
ON