Table of Contents
Advertisement
Trap Community -
T he Simple Network Management Protocol (SNMP) trap community.
Default Value: "public"
Trap Sink Address -
Value: "127.0.0.1"
Web UI - Security
See the
W eb UI Authentication
Web UI - Upgrade
Upgrade Firmware
See the
W eb UI Upgrade
Upgrade Features
See the
W eb UI Features
Web UI - Help
Help provides an HTML version of this manual, firmware release notes, API notes, SNMP
MIBs and licenses used in making the product.
API Interface
The API or Application Programming Interface is an advanced interface to interact with
Adtec products. This interface is available for special cases such as system integration,
network management systems (NMS), advanced troubleshooting, developers and testers.
An operator does not generally interface with the API directly, but instead will interface with
third party software. If an operator does need to interface with the API, generally it will be
for troubleshooting purposes with the aid of a support representative. API commands and
documentation can be found on the Help tab of the product and the Adtec Digital website.
The API is available both via network (Telnet) and serial (COM2) connectivity.
Telnet (standard 23 port)
To connect to an Adtec unit using a terminal session, the IP address of the unit must be
known. See earlier instructions on setting IP address via the front panel.
Windows XP, MAC and Linux Instructions:
Using a terminal window, complete the following:
Step
Action
1
Type 'telnet x.x.x.x' in a terminal window, without quotes, where x.x.x.x is the IP
address of the unit.
The Simple Network Management Protocol (SNMP) trap sink. Default
article for information on Security.
article for information on unit and demodulator firmware upgrades.
article for information on unit and demodulator feature keys.
76
Hide quick links:
Advertisement
Table of Contents
