Decoder Status - Adtec RD-71 User Manual

The left-hand panel of the application will report current status in real-time while the right
panel tabs will allow you to configure your device. As you navigate through the web
application look for the ? icons associated with each parameter. By clicking on these
question marks, you can view additional information about how the parameter is used.
Web UI Status Panel
The left-hand panel of the web application will report current device status while the
right-hand panel will allow you to configure your device. This section will cover what each
part of the status panel represents. Each panel may be collapsed or expanded by clicking
on the icon with the 'double up'
status may contain an LED that summarizes the current state of the individual status box.
Green represents, OK, Yellow represents, Potential Warning, and Red represents an alarm.
Firmware and Temperature
The top left hand status displays a logo of the
product, Firmware version and operating
temperature of the IRD

Decoder Status

The Status LED will be green if the decoder
is actively decoding a program from the input.
The selected input data rate (Transmux Rate)
is displayed as well as the Service ID-Name
(Program Number and Program Name),
Service Provider, Generated Bars/Tones/ID
Status and whether the program is being
decrypted successfully with a BISS key.
RF Rx Status
or 'double down' arrows. The heading of each
41