Adtec RD-71 User Manual page 67

10-bit 1080p integrated receiver decoder
Hide thumbs Also See for RD-71:
Table of Contents

Advertisement

for decryption.
TS Out Decrypt​ - ​
T he TS Out Decrypt configuration determines if the ASI output should
mirror the selected input (​ O FF), thus preserving any encrypted streams or if it should be
decrypted / free to air (​ O N).
OFF, the default configuration, is recommended for users needing to redistribute transport
streams in their original form. The decoder will decrypt / decode the selected program with
the entered BISS key, but the ASI output will remain unaltered.
ON is recommended for users needing to redistribute the ASI output as a free to air
SPTS/MPTS. All programs will be decrypted with the user entered BISS key.
The RD does not support BISS encrypted streams over 120Mb/s at this time. If an entire
MPTS needs to be decrypted (TS Out Decrypt=​ O N), the rate must not exceed 120Mb/s. If
an encrypted MPTS exceeds the 120Mb/s limit, turn TS Out Decrypt to ​ O FF, the default
configuration. In this mode, the selected program will be decrypted and decoded. A single
encrypted program (Video+Audio) must not exceed 120Mb/s when TS Out Decrypt=​ O FF.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents