Adtec RD-71 Quick Start Manual

RD-71
10-bit / 1080P Integrated Receiver Decoder
Thank you for your purchase of the
Adtec RD-71 Receiver/Decoder. This
product is sold with optional demodulator
hardware packages. Configurations and
indicators relevant to those add-on package
are noted here. If you purchased this
product without a demodulator, please
disregard settings noted with an asterisks.
Quick View Status
For information on the core systems of the IRD, use
the down arrorw on the front panel to scroll through
these quick view menus.
Decoder Status Input TMR Encryption
DECODING ASI TMR:20.000M CAS:Free to Air
SVC: 00001 "Serv. Name" "Serv. Provider"
Service ID Service Name Service Provider
CODEC Chroma Bit Depth Delay Mode
COD: H.264 CHR: 422 BITD:08 DLYM: NORMAL
VRT: 18.012Mb/s RES:1920X1080 FR:59p
Video Rate Resolution Frame Rate
Video PID PCR PID PMT PID Aspect Ratio
VID:441 PCR:441 PMT:440 ARA:16X9
Type Bitrate
Audio 1-8
1:MU 384k 3:MU 384k 5:MU 384k 7:MU 384k
2:MU 384k 4:MU 384k 6:MU 384k 8:MU 384k
Audio PIDS 1- 8
Audio 1:11300 3:11400 5:11500 7:11600
PIDS 2:11300 4:11400 6:11500 8:11600
Input Mode/FEC Rcv Level Link Margin
RF1 32APSK9/10 Lvl: -52.0dB LMar:20.5dB
LOCKED DVB-S2 Sym:29.970Ms Es/No:29.8dB
Lock Status Type Symbol Rate Eb(s)/No
IP Rx Mode FEC and L/D Detection DVB per IP Packet
IP Rx: RTP FEC: NO L/D: N/A DVBperIP: 7
Bu er: 10% Level: 1000ms 226.0.1.58:2000
Bu er Level (%) Bu er Level (ms) IP Rx Address
Reset:
Should you need to reset your device, you can do
so via the front panel by pressing the MODE,
ESCAPE and RIGHT ARROW keys simultaneously.
Adtec Digital US Sales +1-615-256-6619 International Sales +1-904-394-0389
RF Rx* RF Rx*
Services
LB PRX
<< RF1 - RF2 >>
RF1 RF2 IP
ASI Tuner Input
Tuner State
Select Service Local Oscillator
Select First Downlink
Manual LO
Local Oscillator
Downlink
Manual LO
L-Band
L-Band
Modulation Type
Acquisition Range
Modulation Mode
S2X Rollo
Symbol Rate
LNB Polarity
Acquisition Range
LNB Tone
Roll-o
Modulation Type
ISI Control
Symbol Rate
ISI
LNB State
RF Stats
LNB Polarity
Pro le Menu
LNB Tone
RF Stats Menu
Model Indicators:
Pro le Menu
DVB-S/S2/S2X demodulator (PRX)
DVB-S/S2 demodulator (LB)
No demodulator
Decode ASI IP RF
Lock 1
Lock 2
RD-71
10-bit / 1080P MultiCODEC
Receiver / Decoder
A5
A1 A2 A3 A4
www.adtecdigital.com
IP Rx Video
Rx IP
Output Menu
Rx Port
Genlock Menu
SSM Address
Connector
Latency
Time Out
Error Recovery
LED Status
ISI
Decode
Off - Decoder is idle
On - Decoder is active
ASI/IP/RF
Off - No services detected
On - Services detected
Lock 1 / Lock 2 (LB)*
Off - Tuner is not locked
On - Tuner is locked
Lock (1 or 2) / Lock (3 or 4) *PRX
Off - Tuner is not locked
On - Tuner is locked
IP Out
Off - IP Egress is idle
On - IP Egress is active
Bars
Off - B/T/ID options are disabled
On - B/T/ID are enabled
IP Out
Bars Alarm BISS DECODING ASI TMR:20.000M CAS:Free to Air
SVC: 00001 "Service Name" Service Provider
Link Busy
A8
A7
A6
VBI
Audio CAS
<< AUDIO 1-8 >> ANC Passthrough Mode
Audio PID
AFD Menu Clear SW
O set
CC Menu Encrypt. SW
Dolby D Mode
Teletext Menu User ID 1
Dolby E Line
User ID 2
SDI Matrix
TS Out Decrypt
ANALOG VOL.
(Audio 1-2 only)
Audio Sync Mode
Audio Assign Order
A1 - A8
Off - No Audio Decoding
On - Audio Decoding
Blinking - Fail to decode or pass
audio
Alarm
Units ship with the front panel
Off - No system alarms
logged in by default. If you become
On - System alarm
logged out and are prompted for a
password, use the following key
BISS
sequence for access.
Off - Decryption config is OFF
On - Decryption config is ON
Front Panel Menus:
Busy
Off - No network activity Use Mode Button to move
MODE
On - Network traffic present
through top layer menus.
Use arrows for navigation
Link
in submenus.
Off - No network detected
On - Connection active Special Keys:
Use the F2 button as a decimal.
F2
Quick Start Guide
IP Tx System Pro les
<< 1 - 4 >> Login Last Loaded
Select
Mode Duration
IP Tx Mode Network Menu Save
Tx IP Address Time Menu Delete
Tx Port NTP Menu
TX GW Address Alarm Menu
DVB Per IP SNMP Menu
RTP COM2
Feature Menu
FEC Mode
FEC L Name
FEC D Firmware
Type of Service Backlight
TTL
Tx Connector
Press <Select> when panel displays
'User Login -- logged out'
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
Use select to enter into edit
mode and enter to
ENTER
SELECT
save selection.
1 2abc 3def
MODE
4ghi 5jkl 6mno
SELECT
7pqrs 8tuv 9wxyz
ENTER
ESCAPE
F1 0 F2
2018 Adtec Digital