Table of Contents
Advertisement
allows users to filter or cherry pick programs destined for the output from an MPTS input.
Up to 5 services can be mapped to the ASI Filtered output.
ASI TS Source -
A SI TS Source configures the transport stream input to ASI output routing
of the IRD.
ASI Output TMR -
A SI Output TMR determines the ASI egress rate. When set to AUTO, the
default, the output rate will be the sum of all PIDs configured for the output + minimal NULL
stuffing. When set to NATIVE, the output TMR is set to match the INPUT source TMR.
MANUAL is a user defined rate.
Manual TMR - When ASI Output TMR is set to MANUAL, this field may be configured for a
value in Mb/s.
IP Tx configures IP Destinations and Service Filtering for the IP Outputs. A summary table
of active configuration can be seen when visiting the IP Tx tab. Click edit next to the
desired destination to configure parameters. Read more about protocols in the
I P section
.
70
Hide quick links:
Advertisement
Table of Contents
