Chain Case; Disassemble - Taylor-Dunn SC-011-59 Operation, T Roubleshooting And Replacement Parts Manual

Transmission

CHAIN CASE

NOTE: Some vehicle configurations may require that the transmission be

Disassemble

6. Place an oil drain pan under the chain case.
7. Remove the chain case drain plug and allow all of
the oil to drain from the housing and then reinstall
the drain plug
8. Remove the brake drum. Refer to section
Replace the Brake Drum
regarding removing the brake drum.
9. Remove the nuts from the three threaded studs at
the small end of the chain case housing.
removed to disassemble the chain case. Refer to section
Transmission Assembly
transmission.
1. Make sure the key-switch is in the "OFF" position, then remove
the key.
2. Place the forward-reverse switch in the center "OFF" position.
3. Set the park brake.
4. Place blocks under the front wheels to prevent vehicle movement.
5. Disconnect the main positive and negative cables at the batteries.
for information
Transmission
for information on removing the
Brakes:
Typical Chain Case
Page 10