Taylor-Dunn SC-011-59 Operation, T Roubleshooting And Replacement Parts Manual page 65

11. Reconnect the batteries.
Rotating parts, keep hands and loose clothing clear of all moving
parts. Failure to keep clear of moving parts may result in severe bodily
injury and/or property damage.
12. Close all safety interlock switches, turn the key On, place the forward-off-reverse switch in
forward and fully depress the accelerator pedal.
13. Tighten or loosen the adjustment screw to obtain the minimum noise level.
NOTE: If there is less than 1/16" of threads
left on the adjustment screw then the
drive chain has stretched beyond
service limits and should be replaced.
Refer to section
information regarding replacing the
drive chain.
14. Release the accelerator pedal, place the forward-off-reverse switch in off, turn the key off and
disconnect the batteries.
15. Untie the vehicle.
16. Tighten the adjustment screw jam nut and motor mounting nuts.
17. Wipe off any oil that may have come from behind the motor.
18. Lower the drive wheels to the ground.
19. Reconnect the main positive and negative at the batteries, remove the blocks from the wheels,
and test drive.
Chain Case
for
R
Transmission Page 3
Transmission