Taylor-Dunn SC-011-59 Operation, T Roubleshooting And Replacement Parts Manual page 73

10. Remove the chain case housing bolts, brake
assembly, and alignment brackets.
11. Remove the chain case housing from the backing
plate.
12. Remove the pinion seal from the chain case
housing.
13. Loosen the motor mounting bolts.
14. Loosen the chain adjuster.
15. Remove the drive chain, motor nut and sprocket
and the drive sprocket.
16. If the backing plate must be removed from the 3rd
member, first remove the motor from the backing
plate then remove the backing plate from the 3rd
member.
Woodruf Key
Adjusting screw
Nut
3rd Member
Washer
Mounting Plate
Chain Case Housing
Motor
Nut
Bolt
O-Ring
Backing Plate
24
Washer
Nut
Pinion Seal
Brake Assembly
Transmission
Transmission
Typical Chain Case
Motor Sprocket
Spacer
Bolt
Bolt
Drain Plug
Page 11
Nut
Drive Sprocket
Drive Chain
Pinion Nut