Taylor-Dunn B0-248-48AC Operation, T Roubleshooting And Replacement Parts Manual page 57

13. While rotating the input shaft back and forth through its centered position, adjust the gear lash
adjusting screw so that there is a slight drag as the steering gear is rotated through its centered
position.
14. While holding the gear lash adjusting screw so that it cannot turn, tighten the gear lash adjusting
screw jam nut.
15. Reconnect the main positive and negative cables at the batteries.
16. Remove the blocks from behind the wheels.
17. Release the parking brake and test drive the vehicle.
Maintenance, Service, and Repair
R
Steering Page 9