Taylor-Dunn B0-248-48AC Operation, T Roubleshooting And Replacement Parts Manual page 22

Equipped with ac motor peed control
Table of Contents

Advertisement

SAFETY RULES AND OPERATING INSTRUCTIONS
Accelerator Pedal
The accelerator pedal is located to the right of the brake pedal. It controls
the speed of the vehicle and operates similar to the accelerator pedal in
an automobile. Depress the pedal to increase speed and release the
pedal to decrease speed.
Foot Brake Pedal
The foot brake pedal, is located to the right of the steering column, it is
for operation with the right foot only. It works similar to the brake in an
automobile. Applying pressure to the brake pedal slows the vehicle
according to the amount of pressure applied. Relieving pressure from
the pedal releases the braking action.
Steering
The steering wheel and steering system are similar to an automobile. To
turn right, turn the steering wheel clockwise. To turn left, turn the steering
wheel counter-clockwise. If equipped with tilt steering, the release lever
is located on the lower left of the steering column. Pull the lever up to
reposition the steering wheel.
Directional Signals (Optional)
The turn signal lever is located on the left side of the steering column.
Push the lever forward to activate the right turn signal and pull the lever
back to activate the left turn signal.
Hazard Light Switch (Optional)
The hazard light switch is located on the left side of the steering column.
The switch is a small tab. To activate the hazard lights, pull the tab out.
To turn the hazard lights off, push forward or pull back the directional
signal lever.
Safety Rules
Page 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B0-254-48acB 2-48B 2-54

Table of Contents